ABB 1SFA619200R1016 C2SS1-10B-10 Selector Switch

ABB 1SFA619200R1016 is the order code for the C2SS1-10B-10 compact selector switch in ABB’s Compact Range of pilot devices. The product is a two-position selector switch with a short black handle, black plastic bezel, non-illuminated construction, and one normally open contact. It is designed as a panel-mounted operator device for electrical control circuits where a maintained two-position selection function is required.

The selector switch belongs to ABB’s range of operator and pilot devices used for control-panel interfaces and industrial electrical equipment. Its compact construction combines the actuator, front bezel, and switching contact arrangement into a practical operator component. The ABB catalog identifies 1SFA619200R1016 as the ordering code for type C2SS1-10B-10, while the related product classification places it within the Compact Range of pilot devices.

ABB 1SFA619200R1016 Product Overview

The C2SS1-10B-10 uses a short handle and a black plastic front bezel. ABB describes this configuration as a non-illuminated selector switch with two positions. The black finish is part of the standard product configuration, providing a consistent appearance for control panels containing multiple ABB compact operator devices.

The switching arrangement incorporates one normally open contact. The two-position selector is maintained rather than spring-return, meaning the selected position remains mechanically established after the operator is moved. This characteristic distinguishes it from momentary selector configurations that automatically return to their original position when the handle is released.

ABB documentation identifies the product as C2SS1-10B-10 and assigns the order code 1SFA619200R1016. The same order code is also associated with the ABB catalog description of a compact selector switch with two fixed positions, short handle, black color, non-illuminated operation, and one normally open contact.

Two-Position Selector Operation

A selector switch provides a direct mechanical interface between an operator and an electrical control circuit. In the case of ABB 1SFA619200R1016, the actuator provides two defined positions. The selector remains in the selected position, allowing the contact state to represent a persistent operating command.

The maintained two-position arrangement can be used where a control system needs a simple selection between two operating states. Depending on the electrical circuit and control logic, the normally open contact can be incorporated into a command, enable, mode-selection, or auxiliary control circuit.

The actual function assigned to each selector position depends on the wiring and control-system design. The selector itself provides the mechanical switching interface, while the connected electrical circuit determines how the contact state is interpreted by the control equipment.

Short Handle and Front Design

The 1SFA619200R1016 uses a short handle as its actuator. ABB’s Compact Range includes different selector configurations with variations in handle style, switching position, bezel material, contact arrangement, and operating principle. The short-handle design of C2SS1-10B-10 provides a compact operator interface for installations where a conventional selector switch is required without an extended actuator.

The front bezel is made of black plastic, and the selector is non-illuminated. This means that the device does not incorporate an illuminated indicator within the selector actuator. The black bezel and black handle provide a uniform visual appearance when installed with other black ABB pilot devices.

ABB’s catalog distinguishes this configuration from related selector variants that use different contact combinations, handle arrangements, bezel materials, or operating angles. For this reason, the complete type designation C2SS1-10B-10 should be considered when identifying the required selector configuration.

Electrical Contact Configuration

ABB 1SFA619200R1016 is configured with one normally open contact, commonly abbreviated as 1NO. In the ABB catalog documentation, the C2SS1-10B-10 configuration is associated with one NO contact arrangement. The contact is mechanically operated by the selector mechanism according to the selected position.

A normally open contact provides an open circuit in its normal state and closes when the corresponding switching position actuates the contact. The exact contact state associated with each selector position is determined by the operating principle and the internal contact arrangement. When integrating the switch into an existing control circuit, the wiring should follow the applicable ABB contact diagram and the electrical schematic of the equipment.

The product should not be confused with closely related C2SS1 variants that have different contact combinations. ABB’s Compact Range includes versions with different normally open and normally closed contact arrangements. The 1SFA619200R1016 identification specifically corresponds to C2SS1-10B-10.

Protection and Panel Installation

ABB documentation identifies a front protection rating of IP66 for the 1SFA619200R1016 configuration. The IP66 designation relates to the protection provided at the front of the installed operator device under the specified installation conditions. This characteristic is relevant when selector switches are mounted on industrial control panels or operator interfaces where protection against dust and water jets is required.

The Compact Range is designed around standardized panel operator dimensions. Product information for this series identifies the selector as part of ABB’s compact 22 mm-class pilot-device family. The panel mounting arrangement allows the selector to be incorporated into control cabinets, machine interfaces, distribution equipment, and other electrical operator panels designed for compatible ABB pilot devices.

Correct mounting depends on the panel cutout, mounting hardware, contact arrangement, and installation instructions applicable to the selected configuration. The front protection rating should be considered together with the panel construction and installation method because the overall enclosure protection depends on the complete installation.

Industrial Control Applications

Selector switches are commonly used as operator interfaces in industrial control systems. A two-position maintained selector can provide a straightforward physical method of selecting between predefined control states. Typical examples include local or remote selection, manual or automatic mode selection, enable or disable commands, and other persistent operating functions.

ABB 1SFA619200R1016 can be incorporated into electrical control panels where the control circuit requires one normally open contact and a maintained two-position operator. The actual application is determined by the electrical design of the equipment and the function assigned to the selector position.

Because the selector is non-illuminated, visual indication of the electrical state is provided through the physical position of the handle or through separate panel indicators where required. This configuration can therefore be used alongside pilot lights, pushbuttons, emergency-stop devices, and other ABB operator components to create a complete control-panel interface.

Related ABB Compact Selector Configurations

The ABB Compact Range includes a number of selector switch configurations that share a similar basic construction while differing in electrical and mechanical characteristics. Related models may use two or three positions, different contact combinations, different handle arrangements, or different bezel materials.

For example, ABB documentation lists C2SS1 variants with alternative normally open and normally closed contact combinations. The catalog also identifies configurations using metal bezels and different operating arrangements. These variations are important when selecting a replacement or matching an existing control-panel configuration.

For ABB 1SFA619200R1016, the complete identification consists of the ABB order code 1SFA619200R1016 and the type designation C2SS1-10B-10. Using both identifiers reduces the possibility of confusing this selector with similar-looking models from the same product family.

Product Identification

The main identification for this selector is ABB 1SFA619200R1016. The corresponding type is C2SS1-10B-10. ABB also lists the product within its Compact Range of pilot devices and operator components. The product classification identifies it as an operator and pilot device rather than a power switching device.

When reviewing technical documentation or equipment drawings, the order code and type designation can be used together to verify the required configuration. Important identification characteristics include the two-position maintained operating principle, short handle, black plastic bezel, non-illuminated design, and one normally open contact.

Conclusion

ABB 1SFA619200R1016 is the ABB order code for the C2SS1-10B-10 compact two-position selector switch. The device features a short black handle, black plastic bezel, non-illuminated operation, and one normally open contact. ABB documentation places the product within the Compact Range of pilot devices and specifies IP66 protection at the front of the installed selector.

The maintained two-position mechanism makes this selector suitable for control-panel applications requiring a persistent mechanical selection between two circuit states. Its compact format allows it to be integrated with other ABB pilot devices in industrial operator interfaces. For accurate identification, installation planning, and circuit design, the ABB order code 1SFA619200R1016 should be considered together with the C2SS1-10B-10 type designation and the applicable ABB technical documentation.