ABB 1TGE106111G4052 MStart Withdrawable Motor Starter for MNSiS 400V 22kW 41A

ABB 1TGE106111G4052 Product Overview

ABB 1TGE106111G4052 belongs to the ABB MNSiS motor starter product family and is identified as an MStart withdrawable motor starter. It is designed as a modular motor feeder component for compatible low-voltage motor control center assemblies. The complete article number provides the specific identification required to distinguish this configuration from other products within the ABB 1TGE10611 family.

The product description identifies the 1TGE106111G4052 as a withdrawable motor starter for MNSiS with a 6E2 circuit-breaker configuration. Its electrical characteristics include a 400 V rated voltage, 22 kW rated power, 41 A rated current and 50 kA short-circuit current rating.

These parameters make the product a specific configuration for industrial motor feeder applications. When identifying this starter for engineering, maintenance or equipment documentation, the complete article number should be used rather than relying only on the general MStart or 1TGE10611 family designation.

MStart Withdrawable Motor Starter

MStart is the product designation associated with ABB motor starter modules used within MNSiS motor control systems. The withdrawable construction allows the starter to be incorporated into a modular motor control center architecture, where individual motor feeders can be arranged according to their electrical and functional requirements.

The ABB 1TGE106111G4052 is specifically identified as a withdrawable motor starter. This configuration is suitable for applications where the motor feeder is integrated into an MNSiS assembly rather than installed as an independent motor starter outside the motor control center.

The withdrawable architecture also provides an important product-identification characteristic. ABB offers multiple motor starter configurations within the same product family, and the complete article number is therefore essential when selecting a particular feeder module.

400 V and 22 kW Motor Application

ABB 1TGE106111G4052 is specified for a rated voltage of 400 V and a rated motor power of 22 kW. The associated rated current is 41 A. These electrical values are important when matching the motor starter with the requirements of a compatible three-phase industrial motor feeder.

A 22 kW motor rating is applicable to a broad range of industrial machinery and motor-driven equipment. Depending on the overall system design, motors within this power range can be used for pumps, fans, conveyors, compressors, processing equipment, material-handling systems and other industrial loads.

The motor starter should be selected according to the complete electrical characteristics of the installation. Motor nameplate information, operating voltage, rated current, starting requirements, protective coordination and the MNSiS assembly configuration should all be considered when determining compatibility.

41 A Rated Current

The rated current associated with ABB 1TGE106111G4052 is 41 A. This value is a key selection parameter for the motor feeder and should be considered together with the 400 V rated voltage and 22 kW motor power.

Correct current matching is important when integrating a motor starter into an industrial motor control center. The starter must correspond to the electrical characteristics of the motor and the feeder arrangement. Using the complete ABB article number helps avoid confusing this product with other 1TGE10611 variants that may have different current and power ratings.

For replacement identification, the existing equipment documentation should be compared with the complete 1TGE106111G4052 product designation. The rated current alone should not be used as the only identification parameter because other ABB motor starter configurations may have similar electrical characteristics.

50 kA Short-Circuit Current Rating

The ABB 1TGE106111G4052 is specified with a short-circuit current rating of 50 kA. Short-circuit capability is an important parameter for low-voltage motor control equipment because the available fault level of the electrical distribution system must be compatible with the rating of the equipment and complete assembly.

The 50 kA rating should be evaluated as part of the overall MNSiS installation. Upstream protective devices, feeder design, busbar configuration and the complete motor control center assembly all contribute to the electrical performance of the system.

For engineering applications, the short-circuit rating should therefore be checked against the applicable system requirements and technical documentation. The starter should be applied within the limits defined for the complete MNSiS configuration.

6E2 Circuit-Breaker Configuration

ABB 1TGE106111G4052 is identified with a 6E2 circuit-breaker configuration. The 6E2 designation forms part of the product configuration and provides an important reference when distinguishing this starter from other MNSiS motor starter variants.

Circuit-breaker-based motor starter configurations combine the motor feeder arrangement with the corresponding switching and protective architecture. In an MNSiS motor control center, the starter module forms part of the complete feeder system and works within the electrical structure of the assembly.

For equipment identification, the 6E2 configuration should be considered together with the complete article number, rated voltage, motor power and rated current. This approach provides a more reliable method of identifying the correct motor starter than using the general MStart designation alone.

ABB MNSiS Withdrawable Motor Control Architecture

The MNSiS platform provides a modular architecture for low-voltage power distribution and motor control applications. Withdrawable motor starter modules can be arranged within the motor control center to provide dedicated feeders for individual motors and industrial loads.

The ABB 1TGE106111G4052 is designed around this withdrawable concept. Its mechanical and electrical configuration is intended to correspond with the compatible MNSiS system architecture. Consequently, both electrical ratings and system compatibility should be verified when selecting the component for a particular installation.

This modular approach is especially relevant to industrial installations containing numerous motor feeders. Different starter modules can be assigned to different motors according to their individual electrical requirements while maintaining an organized motor control center structure.

ABB 1TGE106111G4052 Technical Specifications

Motor Feeder Integration

The ABB 1TGE106111G4052 is intended to form part of an MNSiS motor feeder arrangement. Within a complete motor control center, the starter module is integrated with the associated electrical distribution, control circuits, feeder connections and other system components required by the installation.

The 400 V, 22 kW and 41 A ratings provide the primary electrical references for the motor feeder. These values should be checked against the motor nameplate and project documentation before the starter is selected for a particular application.

The 6E2 circuit-breaker configuration provides an additional system-level identification reference. Together with the complete ABB article number, it helps engineers distinguish this motor starter from other variants in the same product family.

Product Identification and Selection

The complete product number 1TGE106111G4052 should be used when identifying this ABB motor starter. The 1TGE10611 family contains numerous configurations, and different models can have significantly different electrical ratings even when their general product descriptions are similar.

When selecting this component for an existing MNSiS installation, the complete article number should be compared with electrical drawings, equipment lists and existing component identification. Important parameters include the 6E2 configuration, 400 V rated voltage, 22 kW rated power, 41 A rated current and 50 kA short-circuit rating.

This complete identification process helps reduce the possibility of selecting a different motor starter variant with an incompatible electrical configuration.

ABB 1TGE106111G4052 Industrial Applications

ABB 1TGE106111G4052 can be considered for industrial motor control applications requiring a 400 V motor feeder within a compatible MNSiS low-voltage motor control center. Typical system-level applications may include pumping equipment, ventilation systems, conveyors, compressors, production machinery and other three-phase motor-driven equipment.

The actual application depends on the complete system design and motor characteristics. Engineers should verify the motor’s rated voltage, current, power, starting method and operating conditions before determining whether this particular starter configuration is appropriate.

Because the 1TGE106111G4052 is a specific MNSiS withdrawable motor starter, its compatibility with the mechanical and electrical structure of the intended motor control center should also be confirmed.

ABB 1TGE106111G4052 MStart Motor Starter

ABB 1TGE106111G4052 is an MStart withdrawable motor starter for the ABB MNSiS low-voltage motor control platform. Its 6E2 circuit-breaker configuration, 400 V rated voltage, 22 kW rated power, 41 A rated current and 50 kA short-circuit rating define a specific motor feeder configuration within the ABB 1TGE10611 family.

The complete article number is the most important reference when identifying this component because ABB offers multiple MNSiS motor starter variants with different electrical characteristics. The 1TGE106111G4052 designation should therefore be retained in equipment records, electrical documentation and component identification.

With its withdrawable MNSiS architecture and defined electrical configuration, ABB 1TGE106111G4052 provides a dedicated motor starter solution for structured low-voltage motor control applications. Its combination of 400 V operation, 22 kW motor power, 41 A rated current and 50 kA short-circuit capability makes it a specific configuration for industrial motor feeder systems.