ABB 1TGE106120D4016 MStart W REV Withdrawable Motor Starter for MNSiS 400V 7.5kW

ABB 1TGE106120D4016 Product Overview

ABB 1TGE106120D4016 is a dedicated motor starter module within the ABB MNSiS low-voltage motor control platform. The product is identified as an MStart W REV withdrawable motor starter, providing a structured solution for motor feeder arrangements in industrial electrical distribution and motor control systems.

The complete article number 1TGE106120D4016 is important for product identification because the ABB 1TGE10612 family contains multiple motor starter variants. Different variants can have different electrical ratings, motor power ranges, control configurations and feeder characteristics. Therefore, the complete ABB article number should be used when identifying or selecting this particular motor starter.

The 1TGE106120D4016 configuration is designed around the MNSiS system architecture. Its withdrawable format allows the motor starter to form part of a modular motor control center arrangement, where multiple motor feeders can be organized within the same low-voltage assembly.

MStart W REV Motor Starter

MStart is the product designation used for ABB motor starter modules associated with MNSiS systems. The W REV designation identifies a withdrawable reversing motor starter configuration. This type of arrangement is intended for motor-control applications where forward and reverse motor operation forms part of the overall control system.

For the ABB 1TGE106120D4016, the MStart W REV configuration provides an important identification reference when comparing this product with other motor starter modules in the ABB 1TGE10612 family. The exact article number should always be checked against the electrical drawings and equipment documentation of the corresponding MNSiS assembly.

The withdrawable construction also distinguishes this type of motor starter from fixed motor-control components. Within a compatible MNSiS motor control center, the starter module forms part of a structured feeder system and is matched to the associated electrical and mechanical architecture of the assembly.

400 V Motor Control Configuration

ABB 1TGE106120D4016 is associated with a 400 V motor-control application and a 7.5 kW motor rating. The specified rated current is 15.5 A, providing an important reference when matching the starter to a compatible three-phase motor feeder.

The 400 V rating is commonly encountered in industrial three-phase low-voltage electrical systems. Motor feeders operating within this voltage range can be used for a wide variety of industrial equipment, including pumps, fans, conveyors, compressors and process machinery.

The actual suitability of the starter for a specific motor depends on the complete electrical system design. Motor characteristics, feeder protection, control requirements, available fault current and the configuration of the MNSiS assembly should all be considered during system selection.

7.5 kW and 15.5 A Motor Starter Rating

The ABB 1TGE106120D4016 is associated with a rated motor power of 7.5 kW and a rated current of 15.5 A. These values are key identification parameters for the product and should be compared with the motor nameplate and electrical documentation before selecting the starter for a particular application.

A motor starter must be correctly matched to the electrical characteristics of the connected motor and the overall feeder. Using the complete product number helps distinguish the 1TGE106120D4016 from other ABB MNSiS starter variants that may have similar physical construction but different current or power ratings.

For engineering and replacement purposes, the rated voltage, rated current and motor power should be considered together rather than using a single parameter as the selection criterion. The complete MNSiS system configuration should also be reviewed to ensure compatibility.

50 kA Short-Circuit Rating

The 1TGE106120D4016 configuration is associated with a 50 kA short-circuit current rating. Short-circuit capability is an important consideration in low-voltage motor control centers because the available fault level of the electrical distribution system must be compatible with the equipment and assembly ratings.

When this motor starter is incorporated into an MNSiS installation, the short-circuit characteristics should be evaluated together with the complete assembly, upstream protection, feeder arrangement and applicable engineering requirements.

The 50 kA value should not be considered independently from the complete electrical system. Correct application requires verification of the complete equipment configuration and the technical requirements of the installation.

Withdrawable MNSiS Motor Starter Architecture

One of the defining characteristics of the ABB MNSiS platform is its modular motor control architecture. Withdrawable motor starter modules can be arranged within a motor control center to create structured feeder sections for different industrial loads.

The ABB 1TGE106120D4016 uses this withdrawable concept. The motor starter is designed to operate as part of an MNSiS assembly rather than as an isolated standalone motor-control device. This makes correct mechanical and electrical identification particularly important when selecting a compatible replacement or configuring a new motor feeder.

In an installation containing multiple motor feeders, individual starter modules can be selected according to the requirements of their respective motors. The complete ABB article number provides the necessary reference for distinguishing different variants within the same product family.

ABB 1TGE106120D4016 Technical Specifications

MNSiS Motor Feeder Applications

ABB 1TGE106120D4016 is suitable for consideration in industrial motor feeder applications based on its MNSiS system configuration and electrical ratings. Motor feeders in this category can be used for industrial pumps, ventilation systems, conveyors, process equipment and other machinery driven by three-phase motors.

The motor starter becomes part of the complete electrical feeder and control arrangement. The actual application depends on the motor, control philosophy, protective coordination and requirements of the complete MNSiS motor control center.

For a 7.5 kW motor application, the 15.5 A rated-current reference provides an important engineering parameter. However, final equipment selection should always be based on the complete motor and system requirements rather than motor power alone.

Product Identification and Selection

The complete ABB article number 1TGE106120D4016 should be used when identifying this motor starter. The 1TGE10612 family contains numerous configurations, and similar-looking modules can have different electrical characteristics.

When replacing or selecting an MNSiS motor starter, engineers should compare the complete article number with existing system documentation. Important parameters include the rated voltage, rated current, motor power, starter configuration, short-circuit rating and motor-control function.

Checking the complete model number also helps prevent the incorrect substitution of another member of the ABB 1TGE10612 family. This is especially important for motor control centers containing multiple starter modules with different ratings.

ABB 1TGE106120D4016 System Integration

Integration of ABB 1TGE106120D4016 into an MNSiS system requires consideration of both the electrical and mechanical characteristics of the motor control center. The starter module is intended to operate within the corresponding MNSiS architecture, where feeder construction and module configuration form part of the complete assembly.

The 6E/4 circuit-breaker configuration is an important part of the product identification. Together with the MStart W REV designation, it provides a more precise description than the general 1TGE10612 family number.

For documentation, maintenance planning and equipment identification, the complete article number should therefore be retained in electrical drawings, equipment lists and component records.

ABB 1TGE106120D4016 MStart W REV Motor Starter

ABB 1TGE106120D4016 is an MStart W REV withdrawable motor starter associated with the ABB MNSiS low-voltage motor control platform. Its 400 V electrical configuration, 7.5 kW motor rating, 15.5 A rated current and 50 kA short-circuit rating identify a specific motor feeder configuration within the ABB 1TGE10612 family.

The 6E/4 circuit-breaker configuration and three-pole motor starter arrangement provide additional identification information for engineering and system selection. When working with an existing MNSiS installation, the complete ABB article number should be verified before selecting the component.

With its withdrawable architecture and defined motor-control configuration, ABB 1TGE106120D4016 is designed as a dedicated component for structured MNSiS motor control applications. Its complete product identification and electrical characteristics make it suitable for detailed equipment documentation and motor feeder selection.