ABB 1TGE106110E4025 MStart Withdrawable Motor Starter for MNSiS 400V 11kW Motor Control Systems

ABB 1TGE106110E4025

The ABB 1TGE106110E4025 belongs to the ABB MStart family of motor
starters for MNSiS systems. MNSiS provides a modular platform for
low-voltage power distribution and motor control, allowing individual
motor feeders to be organized into a coordinated switchgear assembly.
Within this architecture, the MStart unit provides the functional
equipment required for controlling a specific motor circuit.

The 1TGE106110E4025 is specifically identified as a withdrawable motor
starter. A withdrawable configuration is useful in modular switchgear
because the functional unit can occupy a defined position within the
switchgear system while maintaining a structured relationship with the
associated power and control connections.

The product’s 6E4 designation is part of its MNSiS functional-unit
configuration. Combined with the circuit breaker arrangement, the
configuration provides a defined architecture for motor feeder
applications requiring both switching and protection functions within
the low-voltage switchgear system.

MStart Withdrawable Motor Starter

MStart is ABB’s designation for this type of motor starter product.
The withdrawable design is particularly relevant to modular motor
control systems because motor feeder functions can be arranged as
individual functional units inside the MNSiS switchgear assembly.

The ABB 1TGE106110E4025 is configured for direct-on-line motor starting.
DOL starting is a straightforward motor starting method in which the
motor is connected directly to the electrical supply through the motor
starter circuit. In applications where the motor and electrical network
are suitable for direct starting, this arrangement provides a simple
and clearly defined motor control architecture.

The three-pole configuration corresponds to the three-phase low-voltage
motor applications for which this type of motor starter is intended.
The complete feeder configuration combines the motor control function
with circuit breaker-based protection and switching within the MNSiS
modular architecture.

400 V and 11 kW Motor Control

A key characteristic of ABB 1TGE106110E4025 is its 400 V rated voltage.
This specification places the product within common three-phase
low-voltage motor control applications. The unit also has a documented
rated current of 22 A and rated power of 11 kW.

The 11 kW rating provides an important reference when matching the
motor starter to an application. Motor feeder selection should always
consider the complete electrical characteristics of the motor,
including operating current, starting requirements, protection
coordination, and the electrical distribution system supplying the
feeder.

The 22 A rated current is another important identification parameter.
When an existing MNSiS installation is being documented or a specific
motor starter is being identified, the combination of article number,
voltage, current, and power provides a more precise description of the
functional unit than the product family name alone.

Circuit Breaker Configuration

ABB specifies the 1TGE106110E4025 with a circuit breaker configuration.
The circuit breaker forms an important part of the motor feeder
architecture by providing switching and circuit protection functions
within the motor starter assembly.

The documented short-circuit current value for this configuration is
50 kA. This rating is significant when considering the product within
a low-voltage switchgear system because short-circuit performance is
an essential part of electrical system design and protection
coordination.

The 50 kA value should be evaluated together with the complete
switchgear design and applicable electrical standards. The suitability
of a motor starter for a particular installation depends not only on
the individual component but also on the fault level, feeder
characteristics, protection coordination, and overall MNSiS system
configuration.

MNSiS Motor Feeder Applications

ABB MNSiS systems are designed for modular low-voltage electrical
distribution and motor control. Motor feeders within these systems can
serve a wide range of industrial equipment, including pumps, fans,
conveyors, compressors, process machines, and other three-phase motor
loads.

The 1TGE106110E4025 provides a dedicated 11 kW motor starter
configuration for this type of architecture. Its 400 V rating and
22 A current specification make it identifiable as a defined motor
feeder configuration rather than a universal motor control unit.

The withdrawable construction also supports the modular organization
of the MNSiS system. Each motor feeder can be associated with a
particular process load while remaining part of the wider low-voltage
switchgear installation. This makes accurate article-number
identification important when multiple motor starter units are
installed within the same system.

Technical Specifications

Withdrawable Design for MNSiS

The withdrawable design is one of the defining characteristics of the
ABB 1TGE106110E4025. In a modular MNSiS switchgear system, withdrawable
functional units allow individual motor feeder arrangements to be
organized within the switchgear structure while maintaining a defined
relationship with the main assembly.

The documented product dimensions are approximately 150 mm in width,
150 mm in height, and 465 mm in depth or length. These dimensions
provide an important physical reference when considering the product
within the corresponding MNSiS functional-unit arrangement.

Physical dimensions should be considered together with the complete
MNSiS enclosure and functional-unit configuration. Proper mechanical
compatibility is as important as electrical compatibility when
identifying a motor starter for an established switchgear system.

Direct-On-Line Three-Pole Motor Starter

The ABB 1TGE106110E4025 is specified as DOL, three-pole. Direct-on-line
starting is commonly used where the motor and electrical supply are
designed to accommodate the starting current associated with direct
connection to the supply.

A three-pole arrangement is appropriate for three-phase motor feeders.
The motor starter therefore provides a clearly defined connection
between the low-voltage supply and the motor circuit while incorporating
the circuit breaker configuration specified for this product.

The combination of DOL operation, three-pole construction, 400 V rated
voltage, 11 kW rated power, and 22 A rated current gives the
1TGE106110E4025 a clearly identifiable application profile within the
ABB MNSiS motor control system.

Product Identification and System Selection

The complete article number 1TGE106110E4025 should be
used when identifying this ABB motor starter. The broader 1TGE10611
family contains multiple motor starter configurations, so using only
the family number may not provide enough information to distinguish
the required functional unit.

For an existing MNSiS installation, the article number should be
compared with the equipment documentation and the characteristics of
the installed motor feeder. Important parameters include the rated
voltage, rated current, motor power, short-circuit requirements,
starting method, and mechanical configuration.

The 1TGE106110E4025 provides a particularly clear identification
profile because its documented characteristics include 400 V rated
voltage, 22 A rated current, 11 kW rated power, 50 kA short-circuit
current, circuit breaker configuration, and DOL three-pole operation.

ABB 1TGE106110E4025 MStart

ABB 1TGE106110E4025 is an MStart withdrawable motor starter for the
ABB MNSiS low-voltage motor control platform. Its 6E4 circuit-breaker
configuration, 400 V rated voltage, 50 kA short-circuit current,
11 kW rated power, and 22 A rated current define a specific motor
feeder solution for industrial applications.

The DOL three-pole configuration further establishes its intended role
in three-phase motor control. Combined with the withdrawable MNSiS
architecture, the product provides a modular approach to integrating
individual motor feeders into a larger low-voltage switchgear system.

For technical documentation, product searches, equipment databases,
and component identification, the complete designation
ABB 1TGE106110E4025 is the most precise reference.
The product’s MStart designation and its documented electrical and
mechanical characteristics provide a clear technical profile for
applications based on ABB MNSiS motor control architecture.