ABB 764M007-8101 8-Port Low Volume Techtron HPV Slider for Process Gas Chromatograph Valve Applications

The component belongs to the 764M007 family of slider parts. Several related 764M007 variants are listed with different configurations, materials or finishes, making the complete 764M007-8101 designation important when identifying the required component. :contentReference[oaicite:2]{index=2}

Product Identification

• Manufacturer: ABB
• Part Number: 764M007-8101
• Alternative Search Format: 764M0078101
• Part Family: 764M007
• Component Type: Slider
• Port Configuration: 8-Port
• Volume Configuration: Low Volume
• Valve Technology: Techtron HPV
• Application Area: Process Analysis
• Component Category: Mechanical Valve Component

ABB 764M007-8101 Overview

The ABB 764M007-8101 is designed as a mechanical slider for an 8-port low-volume Techtron HPV valve configuration. The term “slider” describes the movable plate or interface component used within a sliding-plate valve arrangement.

ABB catalog information specifically associates this part number with the description “SLIDER 8 PT LOW VOLUME TECHTRON HPV.” :contentReference[oaicite:3]{index=3}

The 8-port configuration is an important part of the product identification because the 764M007 family contains multiple slider variants. The correct port configuration and complete part number should therefore be retained when documenting the component.

8-Port Slider Configuration

The 764M007-8101 is identified as an 8-port slider. An 8-port valve arrangement provides multiple connection positions within a single valve assembly, allowing the valve to control or redirect different process or analytical flow paths.

In process analytical equipment, multi-port valve assemblies can be used to manage sample streams, carrier-gas paths, calibration flows, vent paths and other analytical connections.

The exact flow arrangement depends on the valve assembly in which the slider is installed.

Low-Volume Configuration

The “low volume” designation is another important characteristic of the ABB 764M007-8101.

Low-volume valve configurations are commonly used in analytical systems where minimizing internal dead volume is important. Lower internal volume can help reduce the amount of sample retained within the valve and may support faster transitions between different flow conditions.

For process analytical equipment, valve geometry and internal volume can therefore influence sample handling and response characteristics.

Techtron HPV Valve

The ABB 764M007-8101 is specifically identified as a Techtron HPV slider. ABB component listings use this terminology to distinguish the component from other 764M007 slider configurations. :contentReference[oaicite:4]{index=4}

The complete description indicates that the component is intended for an 8-port, low-volume Techtron HPV valve arrangement.

When replacing or identifying the slider, the valve type and configuration should therefore be checked together with the part number.

Sliding Plate Valve Principle

A sliding plate valve uses a movable plate or slider to establish different flow connections between ports. As the slider moves between defined positions, openings in the plate can align with corresponding passages in the valve body.

This arrangement allows several process connections to be controlled using a compact mechanical structure.

The ABB 764M007-8101 belongs to this type of mechanical valve component and is specifically identified as an 8-port low-volume Techtron HPV slider. :contentReference[oaicite:5]{index=5}

Process Gas Chromatograph Applications

Multi-port valve components are commonly associated with process analytical systems, including equipment used for chromatographic analysis.

Process gas chromatographs require controlled routing of sample and carrier-gas streams. Valve assemblies can be used to select different streams, isolate analytical paths, perform switching operations and support calibration sequences.

A mechanical slider such as the 764M007-8101 can form part of the valve mechanism responsible for establishing these flow connections.

Process Analysis Equipment

Process analysis systems continuously monitor industrial process streams to obtain information about chemical composition and process conditions.

The sample-handling section of such systems can contain valves, fittings, filters, regulators, detectors and other mechanical and analytical components.

The ABB 764M007-8101 belongs to the valve component category and can be catalogued as a mechanical component within the associated analytical system.

Valve Port Management

An 8-port valve provides a relatively large number of flow connections within a compact valve arrangement.

Depending on the system design, individual ports may be connected to sample sources, analytical channels, reference streams, vents or other process connections.

The slider determines which internal passages are connected at a particular valve position.

The exact port-to-port relationship is determined by the specific Techtron HPV valve assembly and should not be inferred solely from the slider part number.

Mechanical Function of the Slider

The slider is a mechanical interface within the valve. Its geometry determines how the internal valve passages are connected as the component moves between operating positions.

The slider must therefore correspond precisely to the valve body and associated sealing components.

Using a slider with an incorrect port arrangement, geometry or configuration could result in an incorrect flow path.

Part Number Verification

The complete part number is:

ABB 764M007-8101

The part may also be entered into some inventory systems as 764M0078101 without the hyphen. However, the original 764M007-8101 format should be maintained as the primary identification.

The suffix -8101 is particularly important because ABB lists multiple 764M007 variants with different suffixes. :contentReference[oaicite:6]{index=6}

Related 764M007 Slider Variants

ABB catalog listings show a number of related 764M007 slider components. These include 764M007-8101, 764M007-8151, 764M007-8201, 764M007-8301, 764M007-8401 and 764M007-8501. The descriptions distinguish these parts by their particular low-volume or Techtron HPV configurations. :contentReference[oaicite:7]{index=7}

The existence of these related variants demonstrates why the complete part number should be verified rather than treating all 764M007 components as interchangeable. :contentReference[oaicite:8]{index=8}

Valve Assembly Compatibility

Compatibility of the ABB 764M007-8101 depends on the specific valve assembly in which it is installed.

Important identification factors include the number of ports, low-volume configuration, Techtron HPV designation, slider geometry and corresponding valve-body design.

Before selecting a replacement component, the existing part number and valve assembly should be compared with the available technical documentation.

Process Sample Routing

In analytical systems, controlled sample routing is essential for maintaining consistent measurement conditions.

A multi-port valve can direct a selected sample stream into the appropriate analytical path while isolating other connections.

The slider is part of the mechanical mechanism that establishes these connections.

The low-volume configuration can be particularly relevant in analytical applications where internal volume and sample retention are important design considerations.

Analytical Instrument Maintenance

Mechanical valve components require accurate identification during analytical instrument maintenance.

A replacement slider must match the corresponding valve body and other mechanical components. Dimensions, port configuration and internal flow geometry are all relevant.

For the ABB 764M007-8101, the complete part number provides the primary identification reference.

Inspection Considerations

Inspection of a slider can include checking its physical condition, surface condition, port geometry and interaction with the corresponding valve assembly.

The surrounding valve components should also be considered because wear or contamination elsewhere in the assembly can affect overall valve operation.

Any maintenance procedure should follow the applicable equipment documentation and the requirements of the specific analytical instrument.

Industrial Process Applications

Process analytical systems are used in industries where continuous measurement of process streams is required.

Typical applications include chemical processing, refining, petrochemical production, gas processing, power generation and other industrial processes.

Within these environments, analytical valve assemblies can be used to manage process samples and analytical gases.

Technical Identification Table

Industrial Spare Parts Management

For industrial inventory management, the ABB 764M007-8101 should be recorded using its complete part number.

Recommended inventory information includes the manufacturer, complete part number, component description, associated valve family and application equipment.

• Manufacturer: ABB
• Part Number: 764M007-8101
• Component Description: 8-Port Low Volume Techtron HPV Slider
• Component Family: 764M007
• Application: Process Analysis Valve
• Configuration: 8-Port Low Volume

Importance of the -8101 Suffix

The -8101 suffix should not be removed when identifying the product.

ABB catalog information shows multiple 764M007 slider variants with different suffixes and descriptions. Therefore, using only “764M007” is insufficient for precise component identification. :contentReference[oaicite:9]{index=9}

For technical records, online product pages and inventory databases, ABB 764M007-8101 should be used as the primary product identifier.

Product Naming for Online Catalogues

A suitable technical product name for online cataloguing is:

ABB 764M007-8101 8-Port Low Volume Techtron HPV Slider

Useful search variations include ABB 764M007-8101, ABB 764M0078101, ABB 764M007, ABB 8-Port Low Volume Slider, ABB Techtron HPV Slider and ABB Sliding Plate Valve Slider.

Compatibility Verification

When verifying an ABB 764M007-8101 component, the valve’s port count and low-volume configuration should be checked first.

The Techtron HPV designation should also be compared with the existing valve assembly. Related ABB slider part numbers may have similar descriptions but different configurations, so the exact suffix should be confirmed before installation. :contentReference[oaicite:10]{index=10}

Conclusion

The ABB 764M007-8101 is an 8-port low-volume Techtron HPV slider used as a mechanical component within an associated valve assembly. ABB component catalog information specifically identifies the part with this description, distinguishing it from other members of the 764M007 slider family. :contentReference[oaicite:11]{index=11}

Its 8-port configuration, low-volume design and Techtron HPV designation are the key characteristics for technical identification. Because several related 764M007 variants exist, the complete 764M007-8101 part number should be retained when documenting, cataloguing or matching the component.

For industrial product cataloguing, the recommended identification is ABB 764M007-8101 8-Port Low Volume Techtron HPV Slider.