ABB AW601176 Tubing Kit Excluding Pump Tubes for Navigator 600 Silica Analyzer

The kit belongs to the fluid-handling section of the silica measurement system. It is used for tubing replacement within the analyzer’s wet section and associated sample and reagent paths.

Product Identification

• Manufacturer: ABB
• Part Number: AW601176
• Product Type: Tubing Kit
• Product Description: Tubing Kit Excluding Pump Tubes
• Application: Silica Measurement
• Associated Analyzer: ABB Navigator 600 Silica
• Product Category: Analyzer Spare Part
• Measurement Area: Continuous Liquid Analysis

ABB AW601176 Overview

ABB AW601176 is a replacement tubing kit intended for compatible Navigator 600 Silica analyzers. ABB’s Navigator 600 Silica documentation lists AW601176 specifically as “Tubing kit (excluding pump tubes).” :contentReference[oaicite:2]{index=2}

The component is part of the analyzer’s fluid-management system rather than an electronic control board or measurement transmitter. Its function is associated with the routing of liquids through the analyzer’s wet section.

The complete part number should be retained when identifying the kit because the Navigator 600 Silica system contains several different tubing and pump-related spare parts.

Navigator 600 Silica Application

The ABB Navigator 600 Silica is a continuous silica measurement system used for monitoring silica concentration in liquid process streams. AW601176 is included in the documented spare-parts structure for this analyzer family. :contentReference[oaicite:3]{index=3}

The tubing kit supports the fluid path used by the analyzer during sample handling, reagent movement and measurement processes.

Correct tubing configuration is important because the analyzer depends on controlled liquid flow through its wet section.

Tubing Kit Function

The purpose of AW601176 is to provide replacement tubing for the analyzer while excluding the dedicated pump tubes. ABB’s spare-parts documentation makes this distinction explicitly. :contentReference[oaicite:4]{index=4}

This means AW601176 should not be treated as a replacement for the separate pump-tube assemblies identified by their own ABB part numbers.

The tubing kit is therefore best considered a dedicated fluid-path maintenance component for the Navigator 600 Silica system.

Excluding Pump Tubes

The “excluding pump tubes” description is an important part of the ABB AW601176 identification. The Navigator 600 Silica spare-parts list separately identifies pump tubing components, including AW600096, AW601118 and AW601119. :contentReference[oaicite:5]{index=5}

AW601108 is separately listed as a pump tube kit containing AW600096, AW600097, AW601118 and AW601119. :contentReference[oaicite:6]{index=6}

Consequently, the AW601176 kit and the pump-tube assemblies serve different maintenance purposes.

Wet Section Tubing

The tubing in a continuous liquid analyzer forms the physical path through which samples, reagents and other process liquids move between the associated components.

The condition of these tubes can influence liquid flow, sample handling and measurement stability.

AW601176 provides the tubing components specified for replacement within the applicable analyzer configuration.

Silica Measurement System

Silica analyzers use chemical measurement processes to determine the concentration of dissolved silica in a liquid sample. The wet section contains the fluid-handling components required to prepare and transport the sample and reagents through the measurement sequence.

The AW601176 tubing kit is associated with this fluid-handling section and therefore supports the physical routing of liquids within the analyzer.

The exact tube locations should be identified from the applicable Navigator 600 Silica service documentation before replacement.

Relationship to Pump Tubes

The Navigator 600 Silica system uses dedicated pump tubes as part of its liquid-handling system. ABB identifies the blue and green pump tube as AW600096, the red and violet pump tube as AW601118, and the orange and brown pump tube as AW601119. :contentReference[oaicite:7]{index=7}

These components are separate from AW601176. The AW601176 description specifically excludes pump tubes.

This distinction is important when preparing a maintenance parts list for the analyzer.

Related Spare Parts

ABB documentation lists AW601176 alongside several other Navigator 600 Silica spare parts, including AW601155 annual spares kit, AW601102 reagent tube replacement kit, AW600049 filter assembly and AW600087 filter pack. :contentReference[oaicite:8]{index=8}

The individual parts perform different functions within the analyzer, so their part numbers should not be substituted based only on their general tubing or fluid-handling purpose.

Technical Specification Summary

Maintenance Application

AW601176 is intended for tubing replacement during maintenance of compatible ABB Navigator 600 Silica analyzers.

Tubing can gradually become unsuitable for service because of mechanical wear, chemical exposure, temperature conditions or repeated pump and flow cycles.

Replacing the applicable tubing helps maintain the intended fluid routing within the analyzer.

Tubing Inspection

Inspection of the analyzer’s tubing can include checking for visible cracks, deformation, discoloration, leakage, loose connections and restrictions in the fluid path.

The condition of tube connections should also be considered because an improperly seated connection can affect sample or reagent flow.

When replacing tubing, each tube should be routed according to the original analyzer configuration.

Fluid Path Considerations

The Navigator 600 Silica analyzer contains multiple fluid paths, and individual tubes can have different positions and functions.

For this reason, tubing should be identified by its position and associated component rather than being treated as interchangeable generic tubing.

The AW601176 part number should be checked against the analyzer model and applicable spare-parts documentation.

Compatibility Verification

Before selecting ABB AW601176, the following information should be verified:

• ABB part number AW601176
• Navigator 600 Silica analyzer configuration
• Single-stream or multi-stream system configuration
• Tubing locations requiring replacement
• Pump tube requirements
• Wet-section configuration
• Applicable service documentation

AW601176 should not be assumed to include pump tubes because ABB specifically defines the kit as excluding pump tubes. :contentReference[oaicite:9]{index=9}

Single-Stream Analyzer Application

ABB’s Navigator 600 Silica single-stream documentation lists AW601176 as a “Tubing kit (excluding pump tubes)” in Appendix H, Spare Parts. :contentReference[oaicite:10]{index=10}

The kit is therefore directly associated with the fluid-handling maintenance requirements of the single-stream analyzer configuration.

Multi-Stream Analyzer Application

The Navigator 600 Silica multi-stream documentation also lists AW601176 as a tubing kit excluding pump tubes. :contentReference[oaicite:11]{index=11}

This indicates that the part is included in the documented spare-parts structure for Navigator 600 Silica configurations beyond a single-stream arrangement.

Product Identification for Inventory

For industrial inventory records, the recommended product name is ABB AW601176 Tubing Kit Excluding Pump Tubes.

Additional searchable descriptions can include ABB AW601176 Navigator 600 Silica Tubing Kit, ABB AW601176 Silica Analyzer Tubing Kit and ABB AW601176 Wet Section Tubing Kit.

The complete ABB part number should remain the primary inventory identifier.

Relationship to AW601155

ABB lists AW601155 as an annual spares kit suitable for analyzers with upgraded pumps and instruments manufactured after October 2010, while AW601176 is separately identified as the tubing kit excluding pump tubes. :contentReference[oaicite:12]{index=12}

These two part numbers should therefore be treated as separate spare-part assemblies even though both are associated with Navigator 600 Silica maintenance.

Relationship to AW601108

AW601108 is identified by ABB as a pump tube kit containing AW600096, AW600097, AW601118 and AW601119. AW601176, by contrast, is the tubing kit excluding pump tubes. :contentReference[oaicite:13]{index=13}

The distinction allows maintenance personnel to identify the required fluid-path components more accurately.

Service and Replacement

When replacing AW601176 components, the analyzer should be placed in the appropriate maintenance condition and the relevant fluid paths isolated according to the applicable service procedure.

The tubing should be installed using the correct routing and connection points. After replacement, the fluid path should be checked for leakage and correct flow before returning the analyzer to normal measurement operation.

Technical Documentation

ABB’s Navigator 600 Silica documentation provides the clearest identification of AW601176, listing it as “Tubing kit (excluding pump tubes)” in the spare-parts appendix. :contentReference[oaicite:14]{index=14}

ABB product information also identifies AW601176 as a silica tube replacement kit and describes the long description as a tubing kit excluding pump tubes for compatible analyzer configurations. :contentReference[oaicite:15]{index=15}

Application Summary

ABB AW601176 is a dedicated tubing kit for Navigator 600 Silica analyzers. Its principal function is to provide replacement tubing for the analyzer’s fluid-handling system while excluding the separately specified pump tubes.

The part is associated with ABB’s continuous liquid silica measurement equipment and is documented in the Navigator 600 Silica spare-parts lists. :contentReference[oaicite:16]{index=16}

Conclusion

ABB AW601176 is a Tubing Kit Excluding Pump Tubes for ABB Navigator 600 Silica analyzers. ABB documentation lists the part in the spare-parts section for both Navigator 600 Silica configurations and distinguishes it from the separate pump-tube assemblies. :contentReference[oaicite:17]{index=17}

The recommended technical product name is ABB AW601176 Tubing Kit Excluding Pump Tubes for Navigator 600 Silica Analyzer. When identifying the component for maintenance or inventory purposes, the ABB part number, analyzer configuration and applicable fluid-path arrangement should be verified.